Your PC Ran into a Problem và Needs to lớn Restart? If you are being troubled by such annoying issue, you have sầu come to lớn the right place, for this article explains the best way lớn fix blue screen error of death. No matter your PC can boot into the Safe Mode or not, you will get a nice suggestion.Quý Khách vẫn xem: Your device ran inlớn a problem & needs to lớn restart

Sometimes when booting your Windows 10, you see a xanh screen which tells that your PC ran inlớn a problem and needs khổng lồ restart. If you try to reboot again, the same screen. This issue is called BSOD (blue screen error of death) as shown below:


*

The full error message can be:

"Your PC ran inkhổng lồ a problem and needs to restart. We"re just collecting some error info, & then we"ll restart for you.

Bạn đang xem: Cách sửa lỗi “your pc ran into a problem and needs to restart”

"

OR

"Your PC ran inkhổng lồ a problem that it couldn"t handle and now it needs to restart. You can tìm kiếm for the error online."

Along with the message is the specific stop code that can be:

ALWAYS_LOOK_ON_THE_BRIGHT_SIDE_OF_LIFEDRIVER_VERIFIER_DETECTED_VIOLATIONHAL_INITIALIZATION_FAILEDMANUALLY_INITIATED_CRASHWDF_VIOLATION

If you have no idea what to lớn bởi vì when your PC ran inlớn a problem và needs to lớn restart frozen, don"t worry, for you may get some clue after reading this article.

What Caused BSOD?

To be honest, it is hard lớn tell the specific reason that brings blue screen error of death. Usually, your PC ran into a problem Windows 10 is caused by a hardware issue or hardware driver issue. And when Windows encounters a "stop error", Windows keeps crashing và you get a blue screen.

But sometimes, your PC ran inkhổng lồ a problem loop can be caused by the followings:

Corrupted system tệp tin.A registry file gets deleted from System32 thư mục.Overheating problem.RAM is running at a higher percentage than the operating system can accept.Virus attaông xã.Forceful shutdown.

It is funny that Windows points you to lớn restart, but you keep receiving the same blue screen after doing so. Seriously, the BSOD error can bring you data loss. Hence, it is urgent khổng lồ recover lost data as well as find a way khổng lồ fix this blue screen error of death.

Case A: Your PC Can Boot into the Safe Mode

If your computer can still boot into Safe Mode, you got multiple ways khổng lồ fix your PC ran inlớn a problem and needs to restart stuchồng. Please read the solutions lớn blue screen error carefully và then piông chồng up the ones you think reliable. And we hope you never go lớn the last one.

Tip: How to enter the Safe Mode when Windows 10 cannot boot? In short, you need the help of Windows recovery drive sầu or Windows installation disk. To get the detailed instructions, read 7 Ways to Boot inlớn Safe Mode in Windows 10.

Fix 1. Update the Drivers

Faulty driver can also bring "your PC ran into lớn a problem và needs lớn restart" error. Please make sure all your device drivers are up-to-date. To vì chưng this, you need professional driver update tools to lớn help you in Safe Mode.

Fix 2. Uninstall Recently Installed Applications

The high RAM can be caused by a recently installed application, further leading lớn blue screen error of death. At this time, please reCall what programs you installed recently và then your PC ran into lớn a problem and needs to restart.

When you are in Windows 10 Safe Mode, go to Programs and Features at the Start thực đơn. Then check and uninstall the programs that are installed recently.

Tip: While uninstalling an application in Windows Safe Mode, you are likely khổng lồ encounter an error message saying "The Windows Installer Service could not be accessed." At this time, you just need khổng lồ vì the followings:Run CMD as an administratorType REG ADD "HKLMSYSTEMCurrentControlSetControlSafeBootMinimalMSIServer" /VE /T REG_SZ /F /D "Service"and press Enter.Type net start msiserver.Try uninstalling the program again.

Fix 3. Modify the Memory Dump Setting

This way is quite useful especially when the BSOD shows "your PC ran into a problem and needs lớn restart memory management":

Step 1. In Safe Mode, right-click This PC on the desktop and select Properties option.

Step 2. Select Advanced system settings on the left of the System tab.

Step 3. Clichồng on the Advanced tab in the upper side of the Properties window. Then under the Start-up & Recovery column click Settings.


*

Step 4. Under System failure topic, uncheck Automatically restart; under Write debugging information, cliông xã on the drop-down menu and select Complete memory dump option.


*

Step 5. Clichồng on the OK button và allow the restart.

Step 6. Chechồng lớn see if you still have the error "your PC ran into a problem & needs lớn restart."

Fix 4. Run System File Checker

Step 1. In Windows 10 Safe Mode, run Comm& Prompt as Administrator.

Step 2. In the popped up command line window, type sfc /scannow and hit the Enter key. Let the system file checker finish và then reboot your PC and see if the blue screen error appearing.


*

Tip: Also this can be done by using a Windows installation disk. To get into lớn the Comm& Prompt, follow the path Repair your computer –> Troubleshoot –> Advanced –> Command Prompt.

Fix 5. Update Windows

There is a high possibility that your PC ran into lớn a problem and needs lớn restart frozen can be fixed by Windows update. Now follow the guidance below:

Step 1. At Cortamãng cầu tìm kiếm box, type update and choose Cheông xã for updates from the best match.

Step 2. Right-click Cheông xã for updates button và let Windows kiểm tra for any update available now.


*

Step 3. Install all updates và restart your PC.

"Here are the solutions for your PC ran into lớn a problem and needs to lớn restart. Tweet this article lớn help more users get out of the BSOD trouble."Cliông xã lớn tweet

Case B: Your PC Cannot Boot inlớn the Safe Mode

If you are unable to lớn get your computer inkhổng lồ Safe Mode, you may have to lớn try these suggestions lớn perform your PC ran inlớn a problem & needs lớn restart Windows 10 fix:

Fix 1. Run Startup Repair

Windows provides a Startup Repair tool lớn help fix Windows boot issues. But you will need the help of Windows recovery drive sầu or Windows installation disk.

Step 1. Use Windows recovery drive sầu or Windows installation disk khổng lồ boot your PC.

Step 2. When you see the option lớn install Windows, click Repair your computer instead. Then choose Troubleshoot –> Advanced Options –> Startup Repair.


Fix 2. Persize System Restore

If you have sầu created system restore points before, you should be able khổng lồ roll your operating system lớn a previous state when the applications and the registry files are still working in good condition.

Step 1. Also, go to the Windows recovery environment.

Step 2. Select Troubleshoot -> Advanced options -> System Restore.

Step 3. Choose an tài khoản to lớn continue (you may need khổng lồ enter the password as well).

Step 4. Click Next to lớn continue.


Step 5. Now select a restore point that will restore Windows bachồng to lớn the date when you weren"t getting the blue screen error & click Next khổng lồ go on.


Restart Windows when the System Restore tool has weaved its magic. In this way your PC ran into lớn a problem Windows 10 should have sầu been fixed now. But if no restore point is available, apply the next solution.

Fix 3. Remix or Reinstall Windows

In case you still have this issue, we advise you khổng lồ reset/reinstall Windows operating system. But before you start, you have khổng lồ recover some key files saved in the system partition as system resetting/reinstallation can clean the original system partition.

As your computer cannot boot, you will need the help of a professional Windows data recovery tool. MiniTool Partition Wizard is a good choice, for it not only helps khổng lồ recover lost files after mistaken deletion but also is capable of recovering files from lost/formatted partition. What"s more, its bootable truyền thông serves data recovery when computer fails to lớn boot.

Free DownloadBuy Now

Simple guidance here:

Step 1. Create a USB bootable truyền thông using its Bootable Media feature (see how to lớn create a bootable media here).

Step 2. Use the USB bootable media lớn boot your computer which suffers from BSOD (learn how lớn boot from MiniTool bootable media).

Step 3. Select the system partition lớn recover files from (drive sầu letter can be changed in the boot mode) và choose Data Recovery.


Step 4. Wait for Data Recovery tool to lớn finish the scanning of the system partition. During the process, you are able to lớn kiểm tra each file lớn see if it is the one you need. If Yes, mark the corresponding checkbox. 


Step 5. Finally, cliông xã Save to select a safe location (should be different from the system partition) for the recovered files.


For the detailed steps, please read our guide How khổng lồ Recover Data When PC Won"t Boot.

Once data recovery is completed, you have sầu the chance to lớn fix xanh screen error of death without worrying about data loss.

Tip: To rephối Windows 10, follow this path: boot your computer using Windows installation disk, then select Repair your computer –> Troubleshoot –> Advanced Options –> Remix This PC.

Related: Quickly Remove sầu "There was a Problem Resetting Your PC" - 2018 Update

To reinstall Windows 10, follow our guide here: How khổng lồ Install Windows 10 on a New Hard Drive sầu (with Pictures).

"Here are the solutions for your PC ran into lớn a problem và needs lớn restart. Tweet this article to lớn help more users get out of the trouble."Clichồng lớn tweet

Now, What khổng lồ Do?

After you have fixed your PC ran into a problem and needs lớn restart stuông chồng, you had better create a Windows system image khổng lồ avoid the similar system error in the coming days. In this way you can quickly restore computer khổng lồ an earlier state instead of spending so much time in finding solutions khổng lồ recover your computer.

We believe sầu MiniTool ShadowMaker is a good assistant for you in this case. Simply put, MiniTool ShadowMaker is Windows backup software that is capable of backing up the Windows operating system, disk và partitions, và the files you appointed from different locations. In addition, it offers automatic backup options to save sầu your effort. With one time thiết lập, your computer gets lifetime system protection.

To baông xã up the operating system using MiniTool ShadowMaker, you need khổng lồ tải về the 30-day Free Trial edition now.

Free Download

Simple instructions here:

Step 1. When you are asked to lớn register, you can input đầu vào the license code or you can click Keep Trial. Then select This Computer to lớn connect.


Step 2. Go to Backup tab & then cliông xã the Source tab as well as the Destination tab khổng lồ choose what to bachồng up & where khổng lồ save sầu the backup files. If you do not make any change, MiniTool ShadowMaker is phối khổng lồ bachồng up the running OS by mặc định.


Step 3. Now you have got more choices lớn make (see the details below). When all is done, click Baông chồng up Now. By doing these, your computer is automatically safeguarded in the coming days.

Xem thêm: 14 Game Phát Lộc Vtc 2017 Ý Tưởng, Phát Lộc Club

By clicking Schedule, you can mix the backup frequency such as daily/weekly/monthly backup;By entering Scheme, you are able khổng lồ let MiniTool ShadowMaker manage the disk space taken up by the backup files;By going to Options, you can make some changes to lớn the backup image such as file compression. 


"MiniTool ShadowMaker is really helpful in automatic system protection. Don"t hesitate to lớn get this Windows system backup software lớn safeguard your operating system as well as the key files."Cliông chồng lớn tweet

The Bottom Line

Reading here, you can try some fixes explained here và see if the blue screen error of death is resolved. If you have any suggestions on your PC ran into a problem và needs to lớn restart Windows 10 fix, let us know by typing your ideas in the bình luận zone below. For any questions towards MiniTool software, welcome khổng lồ contact us via .

Your PC Ran inlớn a Problem

The issue of your PC ran inlớn a problem và needs lớn restart is one of the Blue Screen of Death errors. It is a potential of system crash. The issue of your PC ran inlớn a problem and needs lớn restart always caused by the hardware issue, driver issue, corrupted system files, registry file loss, overheating, vi khuẩn attack, forceful shutdown, etc.